IEEE802.11b/g Wireless LAN USB 2.0 Client Adapter
Version 1.1
13
3 Using the Client Utility
After a successful installation you will see the USB adapter client utility
in the
Windows system tray, as the image depicts below.
To run the client utility right click on the icon on the system tray and then click on
Launch Config Utilities
.
3.1 Link Status
The
Link Status
tab displays the current status of the wireless radio. The
following information is included in this tab, as the image depicts below.
h
Status:
This indicates the state of the client. There are three options:
o
Associated:
Indicates that the wireless client is connected to an
Access Point (AP). The BSSID is shown in the form of 12 HEX
Client Utility icon in system tray
4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299