EnGenius ESR-9750G, Руководство пользователя

Страница: 134 / 176

46
Enter the "MAC Address" and "Comment" of the wireless station to be
added and then click <Add>. The wireless station will now be added into
the "Current Access Control List" below. If you are having any difficulties
filling in the fields, just click "Clear" and both "MAC Address" and
"Comment" fields will be cleared.
Remove an address from the list
If you want to remove a MAC address from the "Current Access Control
List ", select the MAC address that you want to remove in the list and then
click "Delete Selected". If you want to remove all the MAC addresses from
the list, just click the <Delete All> button. Click <Reset> will clear your
current selections.
Click <Apply> at the bottom of the screen to save the above configurations.
- Wi-Fi Protected Setup (WPS)
WPS is the simplest way to establish a connection between the wireless clients
and the wireless router. You don’t have to select the encryption mode and fill in a
long encryption passphrase every time when you try to setup a wireless
connection. You only need to press a button on both wireless client and wireless
router, and the WPS will do the rest for you.
The wireless router supports two types of WPS: WPS via Push Button and
WPS via PIN code. If you want to use the Push Button, you have to push a
specific button on the wireless client or in the utility of the wireless client to start
the WPS mode, and switch the wireless router to WPS mode. You can simply
push the WPS button of the wireless router, or click the ‘Start to Process’ button
in the web configuration interface. If you want to use the PIN code, you have to
know the PIN code of the wireless client and switch it to WPS mode, then fill-in
the PIN code of the wireless client through the web configuration interface of the
wireless router.