EnGenius ESR-9750 Скачать руководство пользователя страница 58

Страница: 58 / 85

Add Port Forwarding

Fill in the "Local IP", "Local Port", "Type", “Public Port” and

"Description" of the setting to be added and then click <Add> button. Then

this Virtual Server setting will be added into the "Current Port Forwarding

Table" below. If you find any typo before adding it and want to retype again,

just click <Clear> and the fields will be cleared.

Remove Port Forwarding

If you want to remove Port Forwarding settings from the "Current Port

Forwarding Table", select the Port Forwarding settings you want to

remove in the table and then click "Delete Selected". If you want to remove

all Port Forwarding settings from the table, just click the <Delete All>

button. Click <Reset> will clear your current selections.

Click <Apply> at the bottom of the screen to save the above configurations.

- Port Triggering (Special Applications)

Some applications require multiple connections, such as Internet games, video

Conferencing, Internet telephony and others. In this section you can configure

the router to support multiple connections for these types of applications.

Содержание ESR-9750






















































































Результаты поиска

Содержание ESR-9750

Отзывы:

EnGenius ESR-9750, Руководство пользователя, Страница: 58 / 85

Результаты поиска

Содержание ESR-9750

Отзывы: