EnGenius ESR-9750 Скачать руководство пользователя страница 40

Страница: 40 / 85

Preamble Type: The “Long Preamble” can provide better wireless LAN

compatibility while the “Short Preamble” can provide better wireless

LAN performance.

Broadcast ESSID: If you enabled “Broadcast ESSID”, every wireless station

located within the coverage of this access point can discover this

access point easily. If you are building a public wireless network,

enabling this feature is recommended. Disabling “Broadcast ESSID”

can provide better security.

CTS Protection: It is recommended to enable the protection mechanism.

This mechanism can decrease the rate of data collision between

802.11b and 802.11g wireless stations. When the protection mode is

enabled, the throughput of the AP will be a little lower due to a lot of

frame-network that is transmitted.

TX Power: This can be set to a bare minimum or maximum power.

WMM: Wi-Fi MultiMedia if enabled supports QoS for experiencing better

audio, video and voice in applications.

- Security

This Access Point provides complete wireless LAN security functions, included

are WEP, IEEE 802.11x, IEEE 802.11x with WEP, WPA with pre-shared key and

WPA with RADIUS. With these security functions, you can prevent your wireless

LAN from illegal access. Please make sure your wireless stations use the same

security function, and are setup with the same security key.

Encryption:

When you choose to disable encryption, it is very insecure to

operate ESR-9750.

Содержание ESR-9750






















































































Результаты поиска

Содержание ESR-9750

Отзывы:

EnGenius ESR-9750, Руководство пользователя, Страница: 40 / 85

Результаты поиска

Содержание ESR-9750

Отзывы: