EnGenius ESR-300H Скачать руководство пользователя страница 7

Страница: 7 / 97

[ pg. 7]

Front Panel

Components

Description

Power LED

This LED goes ON when the power is being supplied to the router.

WLAN LED

This LED goes ON when the RF (wireless LAN) feature is enabled.

WAN LED

This LED goes ON when an Ethernet cable is connected to the router’s WAN port.

LAN (1 – 4 ) LEDs

These LEDs go ON when an Ethernet cable is connected to the corresponding router LAN port.

WPS button

Press 1-to 5 seconds to activate the router’s Wi-Fi Protected Setup (WPS) feature.
Press 6-to-10 seconds to reboot the router.
Press 11 seconds or longer to reset the router to its default settings.

Back Panel

Components

Description

LAN Ports (1 – 4)

Use an Ethernet cable to connect each port to a computer on your Local Area Network (LAN).

WAN /Internet Port

Use an Ethernet cable to connect this port to a cable or DSL modem.

DC-Jack (POWER)

Connect the power adapter to this connector.

Power Switch

Turns the router on or off.

Antenna Connector

Interface for the antennas.

Содержание ESR-300H


































































































Результаты поиска

Содержание ESR-300H

Отзывы:

EnGenius ESR-300H, Руководство пользователя, Страница: 7 / 97

Результаты поиска

Содержание ESR-300H

Отзывы: