
[ pg. 41]
Radio
: You can turn on/off the wireless radio. If wireless Radio is off, you cannot set an access point through wireless.
Mode
: Select Access Point mode or Wireless Distribution Service (WDS) mode for your router.
•
AP: Use the
ESR300H
as a Wireless Access Point for wireless devices to connect.
•
WDS: In a WDS, access points are used to expand the wireless area by connecting to each other, without all of them having a wired
backbone. To set up a WDS, enter the MAC Addresses of the other Access Points configured for WDS (up to 4 maximum) and set
the WDS rate.
Set Security: you can select disable, WEP, or WPA for WDS security.
Band
: You can select one of the wireless standards for your wireless network. The options are:
•
2.4 GHz (B)
•
2.4 GHz (G)
•
2.4 GHz (N)
•
2.4 GHz (B+G)
•
2.4 GHz (B+G+N)
1.
Enable SSID#
: Set the number of Wireless Groups. Up to 4 can be set.
2.
SSID[#]
: The Name of the wireless network.
3.
Auto Channel
: Auto channel is enabled by default. If you wish to select an appropriate
channel for your wireless network, please disable Auto Channel, and select Channel
from 1 – 11.
4.
Check Channel Time
: if Auto Channel is enabled, please select time period you wish
the system check the appropriate channel for your router.
Wireless > Advanced
To change more advanced wireless features of the
EAS300H
, select the
Advanced
option of the Wireless section.
In the
Advanced
option, you can change the following:
1.
Fragment Threshold
: This specifies the maximum size of a packet during data transmission. A value too low could lead to low performance.
2.
RTS Threshold
: If the packet size is smaller than the RTS threshold, the
ESR300H
will not use RTS/CTS to send the data packet.
3.
Beacon Interval
: This is the amount of time that the
ESR300H
will resynchronize the network.
4.
Delivery Traffic Indication Message (DTIM) Period
: The DTIM is a countdown informing clients of the next point of broadcast and
multicast messages over the network. This is a value between 1 and 255.
Содержание ESR-300H
