EnGenius EP902, Руководство пользователя

Страница: 49 / 66

to the 1 st base station (i.e. the handset with ID 11), followed by below
processes
：
1. Press
MENU (Right) soft key followed by 7 to enter
the registration mode.
Registration
3.Multi-Base
BACK SELECT
2. Press & hold the base station
REG button for thress
seconds, the base station will emit the prompt sound
(also the base In Use LED is flashing).
Set Base
BS #1
BACK
SELECT
3. Press digit
3 of handset to enter the Multi-Base
Setting.
4. Select BS # 1
5. Repeat above step 1 ~ 4 to continuously add the 2
nd ,
3 rd or 4 th base station.
Re
：
The base ID for 1 st base station is “10”, for 2 nd
base station is “20”, for 3 rd base station is “30”, for
4 th base station is “40”.
Notes:
1. When initial setting the “Multi-Base”, you have to select the
BS #1 first, then followed the above steps to select 2 nd , 3 rd or
4 th base.
2. For synchronization mechanism, all handsets must be
register again before start using multi-base scenario. i.e. the
initial handset ID with 1x must register to BS1, and the rest
handsets must be registered to 2
nd , 3 rd or 4 th base station
respectively.
3. After all above processes, the “Multi-Base” is complete then.
~49~