EnGenius EP902, Руководство пользователя

Страница: 40 / 66

2.
The base station is not responsible for group assignments.
Consequently, it cannot de-subscribe a handset from a group.
3. When an intercom caller enters a group ID, all handsets
subscribed to this group will ring. The first handset to answer
will establish a link with the caller. Afterward, it is a one-to-
one call, not a one-to-many call.
Call Transfer
While a telephone call is in progress, you can transfer it between different
handsets.
Direct transfer
1. Press OPTION (Right) soft key, followed by the
＊
key
to put the call on hold.
00:00:15
Volume: 3
11
MUTE OPTION
1
L1
You have a
call on hold
UNHOLD OPTION
Enter Ext #:
##
11
CANCEL
L1
2. Press OPTION (Right) soft key, followed by the 1 key
or SELECT soft key of XFER, pressed destination
handset ID, then the held call will be transferred
directly.
After the call transferred to destination handset, the
original handset will go back to standby mode
automatically.
Indirect transfer
If you want to talk to the destination handset before the
call transferred, you can follow with below method:
00:00:15
Volume: 3
11
MUTE OPTION
1
L1
1. During the call, press
key, followed by entering
the destination handset ID.
2.
Press the of the destination handset to answer the
intercom call, you can now talk to the destination
handset. After the talking, press
to end the
intercom call, then the destination handset is able to
pick up the incoming call automatically.
Enter Ext #:
##
11
CANCEL
L1
After the call transferred to destination handset, the
original handset will go back to standby mode
automatically.
~40~