Draft version EP-236-1.1UM
Confidential – Do Not Reproduce or Forward
27
1. Enter the key sequence MENU – Ring Settings – Ring Alert
Settings, then select “Off”. This will turn off the ringer until it is
turn on again from the menu.
2. For temporary silencing the ringer when an incoming call
arrives, press the END key.
Key Guard
1. To prevent accidental dialing, you can press Menu (Left) soft
key, then select Keypad Settings, select Keypad Guard
Settings, then select OK to make Keypad Guard Active. The
handset keypad is locked. No key entry is accepted except
the power on/off key.
2. To unlock the keypad, press and hold the “9” key, then, within
2 seconds, select OK (Left) soft key to unlock.
3. Key Guard is in effect until unlocked or powered off.
Battery Recharge and Replacement
1.
Charge the battery when one or several of the following
happen:
a.
Phone beeps twice every thirty seconds.
b.
Battery icon is empty.
c.
Phone does not respond when a key is pressed.
d.
LCD and backlighting become dim.
e.
Talk range shortfall is experienced.
2.
You can replace the handset battery after placing the call-in-
progress on hold.
3.
Battery talk time and standby time vary depending on the
talk/standby pattern and the operating distance. Putting the
handset back to charger cradle as often as possible is
recommended for best performance.
Note:
Use only manufacturer provided batteries and charger.
Draft version EP-236-1.1UM
Confidential – Do Not Reproduce or Forward
28
Advanced Operations
Handset Registration
1. If your handset(s) is purchased as part of a system, it has
been pre-registered with the base station at the factory.
2. A new additional handset would need to be registered to the
base station if the handset displays reads “Not Registered”.
3. Registration:
a. Press handset Menu (Left) soft key.
b. Press the number “7”, then “1”, this will enter the handset
registration menu.
c. On the base (desk) station press MENU – “5” – “5”, this
will enter the handset registration mode.
d. Select OK from the base station by pressing F1. A sixty
second timer will begin, registration must be completed
within 60 seconds.
e. On the handset select OK (Left) soft key.
f.
Enter the handset ID request 10 through 99. The
assigned ID will be displayed on the handset LCD,
indicating successful registration.
g. Repeat above steps for all additional handsets.
4. De-registration by the handset:
a. Press handset Menu (Left) soft key.
b. Press the number “7”, then “2”, this will enter the handset
registration menu.
c. Select OK (Left) soft key on handset.
d. Handset display will display “Delete?”, select OK (Left)
soft key.
e. After deregistration, the handset will not be able to use the
base to make or receive phone calls.
f. Press END to return to main display screen.
5. De-registration by the base (desk) station:
a. On the base (desk) station press MENU – “5” – “6”, this
will enter the handset de-registration mode.
b. Base station will display “Enter Handset Number 00”,
enter the handset ID to be de-registered.
c. If successful, display will read “Deregistration Successful”.
