EnGenius EOC5611P Скачать руководство пользователя страница 6

Страница: 6 / 76

1.2 Benefits

Access Point Mode

Use this feature to setup the access point’s configuration information. It has support

adjusting transmit power and channel. Client can access the network with different

regulatory settings and automatically change to the local regulations.

Client Bridge Mode

Use this feature to connect to an Access Point and enjoy the great speed of surfing

internet.

WDS Bridge Mode

Use this feature to link multiple APs in a network. All clients associated with any APs

can communicate each other like an ad-hoc mode.

Client Router Mode

This feature functions completely opposite but similarly with AP Router Mode. Client

Router connected to an AP wirelessly and transmits internet connection protocol

through AP to access the internet.

Mesh Mode

Use this feature to establish a NET type of network. Mesh can reduce the cost of the

T1 and xDSL wired network. If one path of the network is broken or blocked, the

transmission is automatically finding the best path to the destination.

Multiple SSIDs

M5000 supports up to 4 SSIDs on your access point. The following options can be set

to each SS to each SSID:

SSID for public or private network

Authentication is fully supported

VLAN identifier

Radius accounting identifier

Profile isolation for infrastructure network

VLAN

Specify a VLAN number for each SSID to separate the services among clients.

QoS

Use this feature to limit the incoming or outgoing throughput.

Wi-Fi Protect Access

Wi-Fi Protect Access is a standard-based interoperable security enhancement that

increases the level of data protection and access control for existing and future

wireless LAN system. It is compatible with IEEE 802.11i standard WPA leverages TKIP

and 802.1X for authenticated key management.

Содержание EOC5611P













































































Результаты поиска

Содержание EOC5611P

Отзывы:

Похожие инструкции для EOC5611P

Бренды по названию

Популярные бренды

EnGenius EOC5611P, Руководство пользователя

Результаты поиска

Содержание EOC5611P

Отзывы:

Похожие инструкции для EOC5611P

Бренды по названию

Популярные бренды