EnGenius ENH1350EXT Скачать руководство пользователя

Страница: 21 / 80

Connect one end of the Ethernet cable into the main

LAN port (PoE) of the Access Point and the other end to
the AP Ethernet port on the PoE injector.

Connect the

Power Adapter

to the

DC-IN

port of the

PoE injector and plug the other end in to an electrical
outlet.

Connect the second Ethernet cable into the

LAN port

the PoE injector and the other end to the Ethernet port
on the computer.

4. Screw on the provided antennas to the device. Once

both connections are secure, verify the following:

a) Ensure that the

POWER

light is on (it will be green).

b) Ensure that the 2.4 GHz/5 GHz WLAN light is on (it will

be green for both 5 GHz and 2.4 GHz).

Ensure that the LAN (Computer/ENH1750EXT

Connection) light is on (it will be green).

d) Once all three lights are on, proceed to set up the

Access Point using the computer.

This diagram depicts the hardware configuration.

Note:

The Access Point supports both IEEE 802.3at PoE

(Power over Ethernet) or the included power injector.
You may use either one as the power source.

Do NOT

use both at the same time.

Hardware Installation

ENH1750EXT

Ethernet

Power

Outlet

PoE Injector/

PoE Swtich

Содержание ENH1350EXT

















































































Результаты поиска

Содержание ENH1350EXT

Отзывы:

Похожие инструкции для ENH1350EXT

Бренды по названию

Популярные бренды

EnGenius ENH1350EXT, Руководство пользователя

Результаты поиска

Содержание ENH1350EXT

Отзывы:

Похожие инструкции для ENH1350EXT

Бренды по названию

Популярные бренды