8
Chapter 2 Installing Drivers&Client Utility
This chapter describes how to install the PC Card drivers and client utility
under Windows 98/ME/2000/XP.
2- 1 Installation for Windows 98/ME/2000/XP
During the installation, Windows 98/ME/2000/XP may need to copy
Windows systems files from the Windows 98/ME/2000/XP installation
diskette or CD-ROM. Therefore you will need a copy of the Windows
98/ME/2000/XP installation diskette or CD-ROM at hand before installing
the driver. On many systems, instead of a CD, the necessary installation
files are archived on the hard disk in C:\WINDOWS\OPTIONS\CABS
directory.
Installation Procedure:
Before installing this new driver in your computer, you need to remove all
of the Wireless LAN PC Card’s drivers that you had installed in your
computer (Please refer to page 9). Please follow the installation
procedures below.
~
Install Wireless PC Card Driver
1. Turn on the computer.
2. Be sure that there is no Wireless LAN PC Card has been inserted
yet.
3. Insert
the
Wireless LAN Installation CD
into your CD-ROM drive.
4. The setup program
“wlan_ForWindows304.1.exe”
should pop out
automatically. If it does not start, you can run it manually by selecting
RUN from the Start menu and running
“wlan_ForWindows304.1.exe”
from CD-ROM drive.
5. Follow the instruction and finish the installation.
6. Insert the PC Card into the PCMCIA slot of your computer.
7. The Wireless LAN PC Card will be found and driver will be installed
without restart the computer as shown in
Figure 2-1-1
.
