EnGenius EAP900H Скачать руководство пользователя | Manualshive

Страница: 59 / 64

background image

59

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate

this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25 GHz band
are restricted to indoor usage only.

IMPORTANT NOTE:
Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 23 cm between the radiator & your body.

Appendix A

«
...
57
58
59
60
61
...
»

Содержание EAP900H

































































Отзывы:

Нет отзывов

Похожие инструкции для EAP900H

Бренд: E-Lins Страницы: 103

Бренд: NEC Страницы: 236

Бренд: BEC Страницы: 18

Бренд: GeoVision Страницы: 69

Бренд: TUYA Страницы: 13

Бренд: ZoneAlarm Страницы: 36

Бренд: wikango Страницы: 20

Бренд: Broadcom Страницы: 10

Бренд: DX Страницы: 17

Бренд: Tornado Страницы: 7

Бренд: EnGenius Страницы: 2

Бренд: EnGenius Страницы: 3

Бренд: Doiting Страницы: 19

Бренд: Viega Страницы: 2

Бренд: Linksys Страницы: 13

UniFi UAP-AC-IW

Бренд: Ubiquiti Страницы: 24

powerbeam m5 PBE-M5-400-ISO

Бренд: Ubiquiti Страницы: 28

Бренд: Sapido Страницы: 101

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды