EnGenius DuraFon PRO, Руководство пользователя

Страница: 55 / 74

55
Repeater Operation
1. Due to the range performance of handset to handset calls
(intercom or broadcast) isn’t as good as line calls, in order to get
better range performance for handset to handset calls, install a
repeater and make the calls via repeater is the solution.
2. The procedure of repeater’s registration is same as the multi-base
which can be performed by administrator handset (Handset 10
and 11).
3. From an administrator handset (Handset 10 or 11), press MENU –
7 to enter the “BC/INT Type” menu setting.
4. Press
or key to select “Repeater Mode”, then press
SAVE (Left soft key)to confirm the selection.
Re : When setting to “Repeater” mode, the handset to handset
calls will always via repeater.
5. Enter the base number (00~07) which assigned the base to be a
repeater.
6. The default of “BC/INT Type” is “P2P Mode”.
Notes:
a. The repeater must work with PRO system.
b. A repeater can only support 2 simultaneous intercom calls (2 pairs handsets).
Or can only support 1 broadcast call.
c . In order to operate with a PRO system, the repeater must be assigned a base ID
from the PRO system, please refer to the multi-base setup to add the repeater as
a multi-base.