EnGenius DuraFon PRO Скачать руководство пользователя страница 35

Страница: 35 / 74

information may have been blocked by the caller or the originating
phone company.

Receiving an Intercom Call

1. When an intercom call arrives, the handset will ring or vibrate unless

the ringer has been turned off. Press

to answer the intercom

call.

2. If the handset is on the charger cradle (ringer will be temporarily

switched to “Ring” if it has been set to “Vibrate”), lift the handset
and start the conversation.

If the handset is not on the cradle, press any key (except

and

the

SILENT

soft key) to answer.

During the call, press and hold the

key, the speakerphone is

active.

Notes:

The LCD displays the caller’s Handset ID.

You can press the

SILENT

if you choose to ignore the call. Unlike

turning off the ringer the

SILENT

key operation is valid only for

the current call.

Ending a Call

To end a telephone or intercom call, press

key or place handset into

charging cradle.

Adjusting Receiver (Earpiece) Voice Volume

1. Voice volume can only be adjusted during a call.

2. There are 6 levels of volume selections. Default as volume

. Use

and

scrolling key to adjust.

3. The new setting remains effective for all future calls until changed.

Содержание DuraFon PRO











































































Результаты поиска

Содержание DuraFon PRO

Отзывы:

Похожие инструкции для DuraFon PRO

Бренды по названию

Популярные бренды

EnGenius DuraFon PRO, Руководство пользователя

Результаты поиска

Содержание DuraFon PRO

Отзывы:

Похожие инструкции для DuraFon PRO

Бренды по названию

Популярные бренды