11b/g Wireless Outdoor Multi-Client Bridge/AP
Version 1.0
36
Note
: Do not un-plug the device during this process. Some firmware upgrades may
restore the configuration back to the factory default settings. Therefore you may need to
restore a configuration from a file. Refer to
Administrator Settings
for details.
4.2.3 System Reboot and Restore Settings to Default
Click on the
System
link under the
System
menu. This page allows you to reboot
the device using the current settings or restore all the settings to the factory defaults.
4.2.3.1 System Reboot
Click on the
Reboot the Device
button to reboot the device using its current settings.
Once the dialog box appears, click on the
OK
button to confirm the action.
4.2.3.2 Restore Settings to Default
Click on the
Restore all Settings to Factory Defaults
button. This option restores al
configuration settings back to the settings that were in effect at the time when the
device was shipped from the factory. Once the dialog box appears, click on the
OK
button to confirm the action.
Note
: The current settings will be lost.
