11b/g Wireless Outdoor Multi-Client Bridge/AP
Version 1.0
16
3.2.1.3 Switch from Bridge to AP Mode
This device can be configured as a Bridge or Access Point. The default IP address
of the device is
192.168.1.1
in Bridge mode. This section will describe the steps to
switch from Bridge to Access Point mode.
Click on the
Switch Device to AP Mode
and then you will see a confirmation dialog
box. Click on the
OK
button to continue.
Please wait while the system is rebooting.
Note
: Do no un-plug the device during this process as this may cause permanent
damage.
Once the device has restarted you may need to access the management page
through a different IP address. The default IP address for Access Point mode is
192.168.1.2.
Refer to
Chapter 4
to configure the device in Access Point mode.
