- 20 -
- Tighten the screw to the Hinge
insert.
5. Put the door back to the refrigerator
and reinstall the bottom hinge by
tightening the two screws.
1. Remove the door from the
refrigerator by removing the
two bolts each from the bottom
hinge and the upper hinge.
2. Remove the bolts from the door
latch plate.
3. Install the upper hinge and the
latch plate to the opposite side
4. Switch the latch position by
following the procedures
below.
-Unscrew the screw from the
Hinge insert.
-Remove the Hinge insert,
Latch handle, Latch pin and
Coli spring from the door.
-Unscrew the Latch handle pin
and screw it into the opposite
hole of the Latch pin.
-Turn the Latch handle upside
down and put it over the Latch
handle pin.
-Install the Coil spring , Latch
handle, and Hinge insert onto
the opposite side of the door.
Make sure the angled face of
the Latch pin faces the cabinet.
Latch pin handle
Latch pin
11.2 Reversing door-swing direction
– ST90F, STR100F, STF100F
Bolts
Door hinge
Door latch plate
Bolts
1. Remove the door from the refrig-
erator by removing the two bolts
each from the bottom Door
hinge and the upper Door hinge.
2. Remove the bolts from the Door
latch plate.
3. Install the upper hinge and the
latch plate to the opposite side
4. Switch the latch position by
following the procedures below.
- Unscrew the screw from the
Latch handle to take apart the
Latch pin and Coil spring.
- Unscrew the Set screw and
screw it on the opposite side of
the Latch pin.
- Insert the Coil spring and Latch
pin to the opposite side of the
door while making sure the
angled face of the Latch pin
Bolts
Door hinge
faces the cabinet.
- Tighten the Screw to install the
Latch handle.
5. Put the door back to the refrigera-
tor and reinstall the bottom hinge
by tightening the two screws.
Make sure the door gasket touch-
es the cabinet flat and tight when
the door is closed.
