Engel R2500IS, Руководство пользователя

Страница: 24 / 44

- 22 -
Be sure any electric devices are turned off before plugging them in.
6.3 Alternating Current (AC) connection
•
Be sure all electric devices including the lines and plug connections are
in good condition before connection to the generator.
•
Be sure the total load is within generator rated output.
•
Be sure the receptacle load current is within receptacle rated current.
TIP:
Make sure to ground (Earth) the generator. When the electric device is
earthed, always the generator must be earthed.
1. Start the engine.
2. Turn the ESC to “ON”.
3. Plug in to AC receptacle.
4. Make sure the AC pilot light is on.
5. Turn on any electric devices.
TIP: The ESC must be turned to “OFF” to increase engine speed to rated rpm.
If the generator is connected to multiple loads or electricity consumers, please
remember to first connect the one with the highest starting current. and last
connect the one with the lowest starting current.