Engel MV7500, Руководство пользователя

Страница: 11 / 30

Note:
1. When the system is in active mode, press POWER key on the RCU pointing to transmitter or on
the top of transmitter, then both the transmitter and the receiver will enter “Standby mode” (RF
disconnected; LED lit in red) and Loop-through display and the 2nd display will be off.
2. When the system is in active mode, press POWER key on the RCU pointing to receiver or on the top
of receiver, then the transmitter will enter “Listen mode” (RF disconnected; POWER LED lit in purple)
and the 2nd display (the display attached to the receiver) will be off but Loop-through display (the
display attached to the transmitter) will keep on.
3. The “Standby” mode consumes 90% less of the power. User has to press power key on top cover of
both transmitter and receiver to resume to “Active mode”.
- 11 -