SECO-LARM BNC VIDEO CONVERTERS
4
SECO-LARM U.S.A., Inc.
WARRANTY
This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s obligation is
limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect,
repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines
that such equipment is not operating properly as a result of causes other than defects in material and workmanship. The
sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only, at
SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential
personal or property damages of any kind to the purchaser or anyone else.
NOTICE:
The information and specifications printed in this manual are current at the time of publication. However, the
SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right to
change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors. Copyright
© 2014 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in part,
without the written permission of SECO-LARM.
SECO-LARM
®
U.S.A., Inc
.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326
E-mail: [email protected]
MiVC-xxxQ_1407.docx
.docx
On-Screen Display (OSD) Programming and Menu Controls:
PITSW4
.docx
Note for VC-2VxQ
First select either NTSC or PAL from the front panel
setting switches (Default is NTSC)
NTSC / PAL Select
Setting
1
2
NTSC
ON
ON
PAL
OFF OFF
VGA device does
not function
correctly
Make sure power, input, and output cables are firmly connected to the converter.
Make sure the video input device is turned on.
Make sure the video output device is turned on.
Test the coaxial cable between the video source and converter to ensure it is
functional.
Test the VGA cable between the video monitor and converter to ensure it is
functional.
Ensure the monitor used supports 720 x 480 resolution (for VC-1BxQ)
Ensure the monitor used can support the resolution selected (for VC-3BxQ)
Ensure that switches are set correctly for NTSC/PAL (for VC-2VxQ)
Power LED
indicator not lit
Make sure power is connected to the converter
Troubleshooting:
OSD Display VC-1BxQ VC-3BxQ VC-2VxQ Description
Brightness
X
X
X
Determines the relative amount of light displayed
Contrast
X
X
X
Determines the relative difference between light and
dark objects
Color Saturation
X
X
X
Determines the relative shade of the colors
displayed
Tint / Hue
X
X
X
Determines the relative hue of the colors displayed
on the screen
Sharpness
X
X
Determines the relative definition of images
displayed
Resolution
X
Choose between 640x480, 800x600, 1024x768, and
1280x1024 (only VC-3BxQ supports 1280x1024)
Horizontal Size
X
Set the horizontal image size
Vertical Size
X
Set the vertical image size
Flicker
X
Adjust image flicker
OSD Background
X
Choose the background color of the OSD screen
