ENFORCER Multi-Color LED Strobe Light
2
SECO-LARM U.S.A., Inc.
The ENFORCER
Multi-Color LED Strobe Light provides all the functions of a regular strobe light, but with
more versatility. The Multi-Color LED Strobe Light can change between seven different colors which can be
set manually via DIP switches, or triggered by an external device via 3 trigger input wires. There are 5 vertical
LED strips, making the light more visible from various directions, and a variable resistor to adjust flashing
speed. The Multi-Color LED Strobe Light has an operating life of 50,000 hours — over 160 times that of a
regular strobe light. No more bulbs to replace!
Overview:
Parts List:
1x LED Strobe Light
1x Manual
2x Mounting Screw with “O” ring
Specifications:
Vertical LED strips
5
Total number of LEDs
25
Possible colors
Red, green, blue, cyan, magenta, yellow, white
Operating voltage
9~24 VAC/VDC
Current draw @12VDC (max.)
Strobe
350mA
Steady ON
350mA
Adjustable strobe speed
Maximum setting
260 times/min
Minimum setting
60 times/min
Operating life
Over 50,000 hours (over 5.7 years)
Operating temperature
-4°~144° F (-20°~65° C)
Electrical protection
Reverse polarity protected
IP rating
IP66
Base
High-impact resistant black ABS
Lens
High-impact heat-resistant acrylic
Dimensions
3
15
/
16
"x3
1
/
8
" (100x79 mm)
Circuit board
Rubber “O” ring
Power wire (brown)
Ground wire (black)
DIP Switches
(for Power ON mode)
Circuit board LEDs
LED Strobe or
steady ON jumper
(default, strobe)
Remove thinned-
out slot for
surface wiring
Circuit board screw
Trigger wires
Vertical LED strips
SECO-LARM
®
SL-3301-BAQ
Strobe
Steady ON
+
+
-
170–226
B1 B2 G1 G2 R1 R2
B
lu
e
G
re
en
R
ed
Mounting screw with
rubber “O” ring
Green trigger wire
Red trigger wire
Blue trigger wire
Strobe speed control
Strobe Steady ON
Introduction:
