ENFORCER SK-910RC4Q Central Receiver
2
SECO-LARM U.S.A., Inc.
Table of Contents:
Introduction ..................................................... 2 Alert Tones ..................................................... 4
Specifications ................................................. 2 Programming Each Channel Output ............... 5
Dimensions ..................................................... 2 Setting the Timed Output ................................ 6
Overview ......................................................... 3 Setting the Auxiliary Relay .............................. 6
Installation Notes ............................................ 3 Setting the Power LED ................................... 7
Code Learning a New Transmitter .................. 4 Sample Applications ....................................... 7
Displaying or Clearing a Channel’s Memory .. 4 Troubleshooting .............................................. 8
Specifications:
Introduction:
The SK-910RC4Q Central Receiver is a four-channel receiver with four independently controlled
output modes and a unique volume-adjustable alert tone for each channel. This RF receiver is
compatible with all ENFORCER transmitters, both code hopping and fixed code. The receiver can
be used to remotely control a variety of home automation devices, such as garage door openers,
lights, motorized gates, lifts, and other devices.
RF frequency
315MHz
# of RF channels
4
Alert sound
100 +/- 3dB@10cm
adjustable
Number of alert tones
4, programmable
Connectors
14-Pin terminal block,
3 pins per relay,
2-pin auxiliary output
Dimensions
5
5
/
16
”x 3
3
/
16
”x1”
(135x83x26 mm)
Operating temperature
-40°~167° F
(-40°~75° C)
Range
Up to 500’ (152m)
2
2
Actual range will vary greatly depending on the operating
environment.
Operating voltage
12VDC
Current
draw
Standby
15mA@12VDC
1 Relay active
85mA@12VDC
2 Relays active
140mA@12VDC
3 Relays active
210mA@12VDC
4 Relays active
260mA@12VDC
All relays active
330mA@12VDC
All
sound
450mA@12VDC
DC power supply
500mA@12VDC
(included)
Relay type
Form C (NO/NC/COM)
Channels 1~4 relay rating
10A@12VDC
Auxiliary relay rating
3A max.
1
1
Included power supply will not support loads larger than 500mA.
For larger loads, replace with appropriate DC power supply.
Dimensions:
1”
(26mm)
Bottom:
Front:
3
3
/
16
”
(83mm)
4”
(100mm)
4
1
/
8
”
(105mm)
5
5
/
16
”
(135mm)
