ENFORCER Enhanced Extenders for HDMI
®
over Single Cat5e/6
2
SECO-LARM U.S.A., Inc.
Introduction:
The ENFORCER Enhanced Extenders for HDMI over Single Cat5e/6 extend the range of HDMI
signals by using an active transmitter and receiver to send video and audio over a single Cat5e/6
cable. 1080p HDMI Signals can be transmitted up to 230ft (70m) between the two units with zero
signal loss. The extender supports IR signals using the included adapters, allowing the user to use
a remote control from one end of an installation to control a device such as a TV or media player at
the opposite end of the installation.
Features:
Signal Strength
– Active operation ensures that the signal strength will remain strong over
the length of the cable.
Distance
– The Enhanced Extenders for HDMI over Single Cat5/e6 can transmit a clear
HDMI signal up to 230ft (70m).
Formats Supported
– The Enhanced Extenders for HDMI over Single Cat5e/6 support both
progressive and interlaced formats: 1080p/1080i/720p/576p/576i/480p/480i.
Plug and Play
– The Enhanced Extenders for HDMI over Single Cat5e/6 come as a complete
set consisting of a transmitter, receiver, power supplies, and IR adapters. No adjustments or
settings need to be made. The unit is ready to use right out of the box.
Zero Signal Loss
– Integrated circuits in the transmitter and receiver clean, buffer, and
amplify the HDMI signal. This prevents signal loss and ensures a clear signal regardless of
the length of the cable up to the maximum range.
Connect Multiple Units
– Repeat up to four sets to extend HDMI range up to 918ft (280m).
Mix and Match
– The tabletop and wall-plate models are compatible with each other.
Connect a transmitter from one model to the receiver of another.
Specifications:
Input video signal
0.5~1.0 Vp-p
Input DDC signal
5Vp-p (TTL)
Maximum single link range
1920x1200, 1080p
Deep color
36-bit
Video formats supported
High-speed HDMI with 3D, HDCP 1.2
Audio formats supported
LPCM, Dolby-AC3, DTS 7.1, DSD
Output video
HDMI
Resolutions supported
1080p/1080i/720p/576p/576i/480p/480i
Range – 1080p
Cat6: Up to 230’ (70m)
Video amplifier bandwidth
10.2Gbps
Cat5e/6 Wiring standard
T568-B
Operating voltage
5VDC
Power supply
2A@5VDC (2 adapters) (2.1mm plug)
Current draw
Transmitter
450mA@5VDC
Receiver
900mA@5VDC
Operating temperature
5°~131° F (-15°~55° C)
Operating humidity
5~90% RH (no condensation)
Dimensions
MVE-AT11-01NQ
4
5
/
16
”x2
15
/
16
”x
7
/
8
” (110x75x23mm)
MVE-AT11-W1NQ
4
1
/
16
”x4
1
/
2
”x
5
/
16
” (116x115x34mm)
Weight
MVE-AT11-01NQ
9.2-oz (260g)
MVE-AT11-W1NQ
9.3-oz (264g)
