SECO-LARM U.S.A., Inc.
ENFORCER 300C/L
Owner's Manual
Page 6
To disarm the alarm, press button #1. The
siren chirps twice, the parking lights flash
twice, and the LED turns off. What happens
next depends on how your alarm is set (ask
your dealer):
Alarm set for active arming:
The alarm is now completely disarmed.
Alarm set for passive arming:
A. A 30 second automatic rearming
period begins.
B. Open a door and turn the ignition on
before the rearming period expires to
completely disarm the alarm.
C. If you do not turn the ignition on in 30
seconds, the alarm rearms, the siren
chirps and parking lights flash once,
and the LED starts flashing.
NOTE Under passive arming, the LED
flashes quickly from the time button #1 is
pressed to disarm the alarm until the alarm is
either completely disarmed or it rearms. The
LED turns off while a door is open (if
connected to door switch).
NOTE If passive arming is used, the alarm
can be forced to remain disarmed if needed.
See "One Time Override of Passive Arming" on
page 4.
DISARMING
If the shock sensor detects light taps on the
car, it will trigger the pre intrusion alert
(the siren chirps five times and the parking
lights flash five times) to warn potential
thieves and vandals. However, if it detects
a strong shock to the car, such as shock
caused by prying the trunk open, it will
trigger the alarm for 30 seconds. (See
DUAL STAGE SHOCK SENSOR, page 8.)
If the built in glass break sensor detects
light taps to the window, it will trigger the
pre intrusion alert. However, if a window
is broken, or is hit hard with a metal
object, it will trigger the alarm. (See
DUAL STAGE GLASS BREAK SENSOR,
page 8.)
Optional SECO LARM shock, motion,
glass break, and microwave sensors will
offer your alarm additional protection.
Ask your SECO LARM dealer.
While your alarm is armed, your car is
protected in the following ways:
Potential thieves or vandals will be
deterred by the flashing LED.
If a thief opens a door, the alarm
immediately sounds the siren and flashes
the parking lights for 30 seconds. If the
opened door is not closed and current
sensing has not been selected, the siren
and lights will trigger up to four 30 sec.
cycles, after which the alarm will rearm.
Turning the ignition key on will trigger the
alarm for 30 seconds.
The starter disable prevents the engine
from being started.
TOTAL PROTECTION
