REMOTE/RF WIRELESS OPERATIONS:
To project an operator’s live voice wirelessly through the Loudspeaker unit via the supplied “Lapel
Microphone” or “Headset Microphone,” please follow the instructions below:
1. Prepare the Loudspeaker unit for “
REMOTE/RF WIRELESS OPERATIONS
”
by inserting the
WIRELESS AUDIO RECEIVER PLUG
into the unit’s
LINE IN
jack.
IMPORTANT NOTE
:
The
WIRELESS AUDIO RECIEVER PLUG
must be
inserted into the
LINE IN
jack for the unit to be capable of receiving audio
signals transmitted by the VHF Wireless Transmitter Pack
(refer to diagram 1.0).
Diagram 1.0
2. Power up the Loudspeaker unit by pressing the unit’s
POWER
switch.
NOTE:
When powered up, the
POWER
switch LED will turn on.
5. Power on the VHF Wireless Transmitter Pack by setting the device’s
POWER
switch to the “
TX F1 ON
” position.
NOTE:
When powered on the unit’s LED will turn on.
3. Insert the male plug of the supplied “
Remote Volume Control Dial
” into
the
MIC IN
jack of the VHF Wireless Transmitter Pack
(refer to diagram 1.1).
Diagram 1.1
4. Connect the supplied “
Lapel Microphone
”
or
“
Headset
Microphone
” by inserting the component’s male plug into the
jack of the “
Remote Volume Control Dial
” that is connected to
the VHF Wireless Transmitter Pack (refer to diagram 1.2 for
illustration of “Headset Microphone” connection).
Diagram 1.2
6. The operator’s voice that is picked up by the microphone connected to the VHF Wireless Transmitter Pack via
the “
Remote Volume Control Dial
” will be wirelessly transmitted and project through the Loudspeaker unit.
NOTE:
To increase/decrease the projection volume output level of the Loudspeaker unit, adjust the dial located
on the “Remote Volume Control Dial.”
IMPORTANT WIRELESS AUDIO TRANSMISSION DETAILS:
The effective wireless audio transmission range between the supplied VHF Wireless Transmitter Pack and
Loudspeaker unit is approximately 150 to 200 ft. (40 to 60m). There are several factors that can impact or prevent
wireless signal transmission. To help ensure wireless signal transmission at the maximum effective range, please
establish a clear, line of sight (LOS) path that is free of “obstacles” between the VHF Wireless Transmitter Pack and
Loudspeaker unit during operations.
6.
