3.2. Installing the car seat (with ISOFIX and vehicle belt)
3.2.1. On each side of the seat, squeeze the ISOFIX button and fully extend the
ISOFIX connectors. Slide the two ISOFIX connectors firmly into the insert guides
until the ISOFIX connectors engage with a “click” noise on both sides. The ISOFIX
button must turn green on both sides.
3.2.2. Push the child seat towards the backrest applying firm, even pressure
on both sides. Make sure it is safely attached and recheck the green safety buttons
to make sure that both are completely green.
Tip:
The ISOFIX attachment points are located between the surface and the
backrest of the vehicle seat.
WARNING! The ISOFIX connectors are only correctly engaged if both of the
ISOFIX buttons are green.
8
3.2.3.
To remove ISOFIX;
push in the secondary release button (1) and squeeze the
ISOFIX button (2) (fig a).
3.2.4. Open buckle and remove the infant cushion. Pull out the vehicle seat belt
and insert the diagonal belt through the upper belt guide. Thread the diagonal belt
under the seat covers and over the arm rest.
3.2.5. Position the lap belt under the arm rest and engage the buckle tongue in the
vehicle seat belt buckle. Flatten the vehicle belts.
3.2.6. Lift up the fabric flap on the seat base. Guide the vehicle lap belt through the
base belt guide (under the fabric flap). Pull on the diagonal belt to tighen the
vehicle belts.
3.2.7. Replace the infant cushion.
1
2
fig a.
Содержание SPIRIT 123
Страница 7: ...2 2 Car Seat Components 6 ...
