Enerzone Solution 2.9, Руководство пользователя

Страница: 35 / 41

34
Your Enerzone stove will work best if a thick bed of hot embers is maintained in the bottom of
the firebox and a minimum of two large pieces of seasoned fuel is added. Combustion efficiency
is largely related to establishing a hot ember bed, and hot firebox temperatures. The quicker the
stove and chimney (flue) get up to normal operating temperatures, the better. A small intense fire
is preferred to a large smouldering fire, both to improve combustion efficiency and to reduce the
amount of creosote build-up. The best performance will be obtained by adding relatively small
amounts of fuel to a well-established ember bed, and then operating with the air inlet control
open long enough to achieve a hot fire. The wood should be placed with air in between
individual pieces. Use a poker to make an air channel in the embers below the wood. This will
allow air to flow under the wood for a more efficient burn.
In order to achieve an optimum efficiency from the Solution 2.9, we suggest that you operate it
with the air control completely closed. Make sure that you have a good fire going and an
adequate ember bed before you completely close the air control. Also, use a chimney
thermometer if necessary. Closing the air control too soon will lower combustion efficiency and
may cause the fire to die out.
In all Enerzone appliances the addition of a blower is highly recommended for maximizing your
unit’s efficiency.
4.6 BLOWER OPERATION
If you have purchased and installed and optional blower, allow the stove to reach its operating
temperature before turning it on (approximately one hour). The increased airflow from the blower
will cool the firebox and affect the start-up combustion efficiency if the blower is turned on too
quick.
C
AUTION
:
ENSURE THAT THE BLOWER
’
S POWER CORD IS NOT IN CONTACT WITH ANY SURFACE OF THE
S
TOVE TO PREVENT ELECTRICAL SHOCK OR FIRE DAMAGE
.
DO NOT RUN THE POWER CORD BENEATH THE
STOVE
.