Enerzone Solution 2.9, Руководство пользователя

Страница: 18 / 41

17
3. CHIMNEY (FLUE SYSTEM)
3.1 DEFINITIONS
For clarity, the following definitions should be used with respect to these instructions:

A chimney system consists of a connector off the top of the stove, and a chimne
y
, which
attaches to the connector and terminates outside the house.

A chimney can be a masonry chimney (of masonry construction with an inside liner), or a
factory built chimney .

A factory built chimney can be a double-walled chimney (two concentric pipes with
insulation - sometimes referred to as an insulated solid pack ) or an air-cooled chimney
(three concentric pipes, with insulation between the first and second pipes, and air
between the second and third pipes).

A single-wall connector is a single pipe.

A double-wall connector has two concentric pipes, no insulation, and is an air-cooled
connector.
3.2 CHIMNEY
CAUTION:

DO NOT fill any framed space around the factory-built chimney with insulation or any
other material. Insulation placed in this area could cause adjacent combustibles to
overheat.

Do not use makeshift compromises during installation as they may be safety hazards, and
a fire could result.

Do not connect this unit to a chimney system serving another appliance.

Do not cut rafters or ceiling joists without first consulting a building official to ensure
structural integrity is not compromised.