Enerzone EB00027, Инструкция по установке и эксплуатации, Страница: 25 / 36

Destination 2.3 Installation and Operation Manual
25
•
Remove the latch (K) and reinstall
the screws that were securing the
assembly into the holes.
•
Note: To avoid dropping the door
due to its weight, get help from
another person to perform the
following steps.
•
Remove screws (J) securing the
hinges to the firebox.
•
Rotate the door over 180 degree and
secure the hinges on the other side.
It is important to reinstall the screws
in the holes left by removal of the
door.
•
To reverse the door handle (M),
unscrew the 2 bolts (L) to access the
handle guide (P).
•
Remove the lock nut (N), then loosen
the shoulder screw (O) and remove
the washer (Q).
•
Remove the door handle (M) rotate it
a half of a turn and reinstall it in the
same location.
•
Attach the door handle (M) and
washer (Q) on the handle guide (P)
with the shoulder screw (O). Make
sure
the parts are properly
assembled.
•
Screw the nut (N) to secure the
mechanism.
•
Secure the handle guide (P) with the
2 bolts (A).
•
To adjust the tightness of the door,
see Section 5.1.2 Adjustment of
the door.