Enerwatt EWC612-200A, Руководство пользователя

Страница: 10 / 12

10
MODEL: EWC612-200A
USER’S MANUAL
NO. DESCRIPTION FONCTION
1 Terminal connection cable (-) with clamp (black) To connect the charger to the battery (- terminal)
2 Terminal connection cable (+) with clamp (red) To connect the charger to the battery (+ terminal)
3 Housing Metal housing with louvres
4 110 V power plug For connecting to a 110V mains socket
5 Transport wheels For transporting the device
6 Inside Fan For cooling the charging electronics
7 Display For operating the device
8 Handle For pushing the device
9 Full / LED green Lights up once the connected battery is fully charged.
10 Charge / LED orange Lights up during the charging process
11 Error / LED red Lights up if the battery is connected incorrectly (reversed poles).
12
40 A / LED red
max. charging current: 6V: 40 A/ 12V: 40 A
For charging high-capacity batteries
(e.g. marine or large deep-cycle batteries) or to quick-charge medium capacity batteries.
13 12V/10A/LED red (max. charging current:10A For charging medium capacity batteries (e.g. for lorries or tractors)
14 12V/2A/ LED red (max. charging current:2A) For charging medium capacity batteries (e.g. for lawn tractors, snowmobiles or motorcycles)
15 GEL / LED red For gel electrolyte batteries
16 AGM / LED red For absorbed glass mat batteries
17 STD (Standard) / LED red For batteries with liquid electrolyte (WET) and maintenance-free lead-acid batteries (MF)
18 BOOST 6 V / LED red (max. starting current: 100 A) Helps start vehicles and equipment with weak batteries.
19 BOOST 12 V / LED red (max. starting current: 200 A) Helps start vehicles and equipment with weak batteries.
20 Charge 12 V / LED blue For charging 12 V batteries
21 Charge 6 V / LED blue For charging 6 V batteries
22 Display Shows the battery’s charging current or the charge condition.
23 START-STOP button to start or stop the selected charging function (indicated by LED)
24 SELECT RATE button for switching the charging current (indicated by LED)
25 SELECT TYPE button for switching the battery type (indicated by LED)
26 SELECT MODE button for switching the charging voltage (indicated by LED)
27 V / LED red Charging voltage
28 % / LED red Battery charge condition
29 SELECT DISPLAY button for switching the display
FUNCTIONS
The charger is equipped with a microprocessor (MCU - Micro Computer Unit) and features fully-automatic charging, diagnostic,
emergency and maintenance functions.
The “trickle charge” function allows the charger to be permanently connected. A full charge will be maintained.
Safety functions
The charger features the following safety features to prevent damage to the charger, the battery and the vehicle:
• Short circuit (defective battery)
• Incorrect connection (connected with reversed polarity)
• Sparking
• Overheating
• Excess current
• Overcharging