enervent Salla eWind, Руководство по установке

Страница: 96 / 112

96
Enervent Salla
PRODUCT INFORMATION ACCORDING TO
EU COMMISSION REGULATION NO 1253/2014 AND 1254/2014
Supplier’s name or trade mark Enervent
Supplier’s model identifier Salla
Specific energy consumption (sec) in kWh/(m
2
.A)
• Cold climate
• Average climate
• Warm climate
-84,50
-40,81
-15,78
Declared typology in accordance with article 2 of this regulation RVU / BVU
Type of drive installed or intended to be installed Multi-speed drive
Type of heat recovery system Regenerative
Thermal efficiency of heat recovery 84,0
Maximum flow rate in m
3
/h 374
Electric power input of the fan drive, including any motor control equip-
ment, at maximum flow rate (W)
211
Sound power level (L
WA
), rounded to the nearest integer
40
Reference flow rate in m
3
/s 0,073
Reference pressure difference in Pa 50
SPI in W/(m
3
/h) 0,37
Control factor and control typology in accordance with the relevant
definitions and classification in annex VIII, table 1
0,65
Declared maximum internal and external leakage rates (%) for bidirec-
tional ventilation units
<0,5% / <2%
Position and description of visual filter warning for rvus intended for use
with filters, including text pointing out the importance of regular filter
changes for performance and energy efficiency of the unit
Filter warning on control
panel. Instructions in user
manual.
Internet address for disassembly instructions as referred to in point 3
https://doc.enervent.com/op/op.ViewOn-
line.php?documentid=3067&version=0
The annual electricity consumption (AEC) (in kWh electricity/a) 1,95
The annual heating saved (AHS) (in kWh primary energy/a) for each type
of climate
• Cold climate
• Average climate
• Warm climate
89,38
45,69
20,66
The information on the energy label for this product has been defined with local demand control. Local demand control means that the ventilation unit continuously regulates the fan
speed(s) and flow rates based on more than one sensor. Please remember to connect all local sensors (some sold as extra equipment) in order to achieve the declared energy class.
A