27
detail information(time, error code); press ESC to exit current screen.
Move selection on “Setting” press OK button, user will get detail information about the setting
items. Press UP and DOWN, LEFT and RIGHT buttons to selection item, finally press OK button
to get into that item user select. See figure 24.
Figure 24 Setting screen
Note that if you want to re-set Country, Input and Factory Set, user need password to get into
the item for setting. This requires security password to change. You can ask help from qualified
technical support.
6.1.3 Autotest procedure- Italy only
Only country setting is Italy during commissioning, Enter main menu then enter setting sub-menu,
select AutoTest Ita. to run, an automatic test of the inverter will initialed by software, user can get
the information via the LCD.
( Main menu→Settings→AutoTest Ita.)
See figure 25.
Figure 25 Autotest selection for Italy only
Operation
Settings
<ESC> to Main Menu
11-04-03 10
:
16:10
Language
Time
Country
AutoTest Ita.
Network
Input
Calibration
Update
LCD
Clear Prod.
Clear Events
Factory Set.
Settings
<ESC> to Main Menu
11-04-03 10
:
17:11
Language
Time
Country
AutoTest Ita.
Network
Input
Calibration
Update
LCD
Clear Prod.
Clear Events
Factory Set.
