1150-HB-KNXnetIP-Interface-en-1.odt, 2018-08-06
Seite 4 von 6
Functional Description
•
Four independent KNXnet/IP tunnel connections
•
LED-signaling for KNX communication, Ethernet communication and programming mode
•
Standard configuration with ETS
•
Configuration of the tunnel addresses via Telnet
Parameterization
The device can be parameterized with ETS3, ETS4 or ETS5. It supports up to four tunnel
connections.
General
Device name
You can assign a user-defined name here (up to 30 characters).
IP settings
IP assignment method
The IP address can be assigned via DHCP, Manually or Zeroconf.
Parameter:
manuell, DHCP, Zeroconf
IP Address
(only for manual assignment)
Parameter: valid IP address in your network
Subnet Mask
(only for manual assignment)
Parameter: valid subnet mask
Default Gateway
(only for manual assignment) (nur bei manueller IP-Adressvergabe)
Parameter: valid IP address in your network
Enertex
®
Bayern GmbH – Ebermannstädter Straße 8 - 91301 Forchheim - Deutschland - [email protected]
