3
SK Models IOM
Enertech Global
SECTION 1: MODEL NOMENCLATURE DECODER
Model Nomenclature:
SECTION 2: INSTALLATION INTRODUCTION
Introduction:
The Dry Fluid Cooler is used to remove heat
from the heat pump heat transfer fluid. Two
configurations are possible with the unit; outdoor
air only, or hybrid operation with the Fluid Cooler
in parallel with the Ground Loop, except in certain
applications (See Section 4 for more details).
Notices, Cautions, Warnings, & Dangers
“NOTICE”
Notification of installation, operation or
maintenance information which is important, but
which is NOT hazard-related.
“CAUTION”
Indicates a potentially hazardous
situation or an unsafe practice which, if not
avoided, COULD result in minor or moderate injury
or product or property damage.
“WARNING”
Indicates potentially hazardous
situation which, if not avoided, COULD result in
death or serious injury.
“DANGER”
Indicates an immediate hazardous
situation which, if not avoided, WILL result in death
or serious injury.
Inspection:
Upon receipt of any geothermal equipment,
carefully check the shipment against the packing
slip and the freight company bill of lading. Verify
that all units and packages have been received.
Inspect the packaging of each package and each
unit for damages. Insure that the carrier makes
proper notation of all damages or shortage on all
bill of lading papers. Concealed damage should
be reported to the freight company within 15 days.
If not filed within 15 days the freight company can
deny all claims.
Note:
Notify Enertech Global, LLC shipping
department of all damages within 15 days. It is the
responsibility of the purchaser to file all necessary
claims with the freight company.
Un-packaging:
Enertech units are mounted to wooden pallets for
easy handling during shipment and installation.
Units are protected during shipment with durable
cardboard corner posts, top and air coil panels.
Shrink wrap is applied covering the entire unit and
attachment to the pallet.
Upon receipt of the unit carefully remove the shrink
wrap. Using a box cutter slit the shrink wrap on
the cardboard top and corner posts. Use caution
to not damaged the finished surface of the unit.