Enertech Bentone B1FUV Classic, Инструкция по установке и обслуживанию

Страница: 8 / 24

8
171 755 16 06-01
05. MAINTENANCE
Suspension of burner
During service the burner can be hung up on the screw in the burner
l ange. The blast tube, shrouded disc, nozzle, preheater and electrodes
are then easily accessible.
Removing the blast tube
1. Loosen the two fastening screws one turn.
2. Turn to the right and withdraw the blast tube.
Shrouded disc
The preheater plug and the electrodes shall be placed on either side of
the oil tube. The hole in the shrouded disc shall be placed upwards to
increase the light towards the photoresistor.
Rubber cable
Check that the rubber cable inlet is properly i xed in order to avoid un-
necessary air leakage.
1(2)
tion of the burner. If the spark hits the metal the efi ciency will be lower and




5. MAINTENANCE
5.1 Suspension of burner
5.2 Removing the blast tube
5.3 Shrouded disc
5.4 Rubber cable