LEGEND
Icon(s)
Description
G
G
B
A
C
D
E
G
H
F
J
I
K
L
M
N
Backup
D
N
D
E
G
H
F
J
A
B
C
L
Grid Tied
D
I
K
M
D
E
G
F
A
B
C
N
A
B
C
D
E
G
H
D
F
J
L
J
Off Grid
Page 6
Home Screen Legend
900-0124-01-02 Rev B
©2017 OutBack Power. All Rights Reserved.
Page 19
O
C
The
AC INPUT
hot key (
C
) brings up
AC Input Status
, with information on the
AC source. It also has commands that can connect or disconnect from the source.
AC INPUT
Screen Items
(
C
):
AC Input Select
(
Radian-class only): This displays which of two inputs was set as first
priority for the inverter. (See the
MATE3s Programming Guide
to make this selection.)
This item is not present in FX-class or FXR-class inverters.
The top line also displays the present AC voltage and frequency from the input source.
Input Mode
:
Allows soft key options to change the mode. This may be overridden by other commands. For example, a system set
to
Drop
will automatically switch to
Use
if AGS starts the generator.
Next to
AC Input Select
is the last reason the status was changed. In
C
, the change is due to an
HBX-SOC
event. Other possible
reasons are
Manual
,
AGS
,
Grid-Time
,
Load Grid
,
or
HBX-Voltage
. See the
MATE3s Programming Guide
for more information.
AC Input Status
:
This displays the current interaction with the AC input. This screen will usually change to match
AC Input Mode
once a soft key command is given. In Radian-class inverters, the displayed AC voltage is the sum of the L1 and L2 phases.
The
<
Drop
>
and
<
Use
>
soft keys (
M
and
N
) manually disconnect or connect to the AC source.
The
<
Discon
>
soft key (
O
) displays a screen with the reason for the last AC disconnect.
Screen Items
(
O
):
This screen shows the reason for the inverter’s last automatic disconnection
from the AC source. The possible reasons include
Input Frequency Too
High
,
Input Frequency Too Low
,
Input Voltage > Maximum
, or
Input
Voltage < Minimum
. Radian-class and FXR-class inverters have
Backfeed
,
Phase Lock
, or
Island Detect
. Most items show
N
(no). If an item shows
Y
(yes), the inverter disconnected for that reason.
FAVORITE
The
FAVORITE
hot key (
D
) allows the user
to program and select up to four frequently
used (or “favorite”) screens for rapid access.
It includes a green LED indicator.
To program the
FAVORITE
hot key:
1. Navigate to the desired screen.
2. Press and hold the
FAVORITE
hot key until the
green indicator flashes.
3. Press one of the four programmable soft keys to
select it for recalling that particular screen. The
green
FAVORITE
LED indicator will stop flashing.
4. Repeat Steps 1-3 to program three more favorite
screens (if desired).
To use the
FAVORITE
hot key to recall the desired screen(s):
1. Press and release the
FAVORITE
hot key. The green
FAVORITE
indicator will
illuminate and stay on.
2. Press the soft key for the desired screen to be recalled.
If no selection is made after pressing the
FAVORITE
hot key, the function will
deactivate and the green indicator will turn off.
N
M
O
Hot Keys:
AC INPUT & FAVORITE
IMPORTANT
Only one favorite screen
can be programmed per soft
key. Attempting to program
more than one screen to the
same soft key will overwrite
the first screen.
Password-protected
screens cannot be saved as
favorites. This means that
the screens described in the
MATE3s Programming
Guide
cannot be saved this
way. (These include any
screens accessed with the
LOCK
key.)
