EnerSys alpha LPS36, Техническое руководство

Страница: 18 / 86

0120011-J0 Rev M 16
4�1�3 Blanks
Blanks are available for blank slots. Order blanking plate kit (contains 2 blanks) #0380070-001.
Figure 3 — LPS36 shelf (19" shown)
NOTE:
Figure 4 — CXCI HP controller front panel
4�2�1 Controllers
Both the CXCI HP and the CXCI+ controllers (Figure 4 and Figure 5) can be used in the shelves. For details on
using either controller go to the Alpha website to download the relevant software manual.
CXCI HP
CXCI HP in-shelf controllers have a small organic LED (OLED) display. This displays 30 characters total (six char-
acters wide, five lines high) and the controller has three navigation buttons and one reset button. The display has
three main operating modes: dashboard, menu and screen saver.
After 20 minutes with no activity, the controller goes into screen saver mode and the display shuts off. From
screen saver mode, press any of the three navigation buttons to re-activate the screen and enter dashboard
mode.
Forward and Back Buttons
to Scroll through menus
LED Status Indicators
• Green - Ok
• Yellow - Minor alarm
• Red - Major alarm
LED Display
Select Button to Enter Menus
and Execute Commands
Reset Button
Blanks must be installed when using fan trays to allow proper air flow to the
modules, see sections 6.4.2.
4.2 LPS36 System Features (19"/23")