EnerSys alpha Cordex CXRF 48-3.6kW Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 52

background image

Modular Switched Mode Rectifier System

Models: Cordex

®

CXRF HP 48-12kW

Cordex

®

CXRF HP 48-4.0kW

Cordex

®

CXRF HP 48-4.6kW

Cordex

®

CXRF 48-3.6kW

For technical support, contact Alpha Technologies:

Canada and USA:

1-888-462-7487

International:

+1-604-436-5547

Email:

[email protected]

Copyright

Copyright © 2020 Alpha Technologies Ltd. All rights reserved. Alpha is a registered trademark of Alpha Technologies.
No part of this documentation shall be reproduced, stored in a retrieval system, translated, transcribed, or transmit-
ted in any form or by any means manual, electric, electronic, electromechanical, chemical, optical, or otherwise
without prior explicit written permission from Alpha Technologies.
This document, the software it describes, and the information and know-how they contain constitute the proprietary,
confidential and valuable trade secret information of Alpha Technologies, and may not be used for any unauthorized
purpose, or disclosed to others without the prior written permission of Alpha Technologies.
The material contained in this document is for information only and is subject to change without notice. While
reasonable efforts have been made in the preparation of this document to assure its accuracy, Alpha Technologies
assumes no liability resulting from errors or omissions in this document, or from the use of the information contained
herein. Alpha Technologies reserves the right to make changes in the product design without reservation and with-
out notification to its users.

Alpha

®

shall not be held liable for any damage or injury involving its enclosures, power

supplies, generators, batteries, or other hardware if used or operated in any manner or
subject to any condition inconsistent with its intended purpose, or if installed or oper-
ated in an unapproved manner, or improperly maintained.

Photographs contained in this manual are for illustrative purposes only. These photo-
graphs may not match your installation.

NOTE:

Operator is cautioned to review the drawings and illustrations contained in this manual
before proceeding. If there are questions regarding the safe operation of this powering
system, contact Alpha Technologies or your nearest Alpha representative.

NOTE:

NOTE:

«
1
2
3
4
5
...
»

Содержание alpha Cordex CXRF 48-3.6kW





















































Отзывы:

Нет отзывов

Похожие инструкции для alpha Cordex CXRF 48-3.6kW

Бренд: Quasar Страницы: 3

AS-Interface AC1254

Бренд: IFM Страницы: 2

Бренд: tacwise Страницы: 5

PSI 9000 Series

Бренд: Electro-Automatik Страницы: 64

Бренд: Wacker Neuson Страницы: 22

Бренд: ZALMAN Страницы: 4

KH 3163 POWER SCRAPER

Бренд: Parkside Страницы: 28

KF**-CRG2-1.D Series

Бренд: Pepperl+Fuchs Страницы: 38

Бренд: 4 BOX Страницы: 3

Бренд: Pulsar Страницы: 8

Бренд: Proluxe Страницы: 17

Бренд: YATO Страницы: 88

Бренд: P.I.T. Страницы: 24

Бренд: Milwaukee Страницы: 37

Бренд: Hot Screen Страницы: 76

Бренд: GAMDIAS Страницы: 11

Бренд: Resi Страницы: 60

Бренд: Universal Tool Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды