23
9400000-J0 Rev E
7.6 Shelf ID Connection
The shelf/bay ID comes factory installed on 4.6kW specific shelves and is only applicable to the 4.6kW rectifier.
If shelves are installed in more than one bay, then set the Bay ID sequentially on each Shelf ID board.
IP
2 x 12kW
Rectifier
Slot IDs
2 x 12kW
Rectifier
Slot IDs
Bay ID 1
Shelf ID 1
Bay ID 1
Shelf ID 1
Bay ID 1
Shelf ID 2
Bay ID 1
Shelf ID 2
CAN driver
Cordex HP
J1
J12
J11
J10
J2 J3 J4 J5 J6 J7 J8 J9
CAN bus (transmits bay ID, shelf ID and rectifier slot IDs to CXC HP)
Rack-mounted Shelf ID
PCB
Bay ID 1
(manually set)
Shelf ID board
RJ12 connection
(located on right
side of shelf)
Example of a single bay
with two rectifier shelves.
Bay ID Display
Up Button
Reset Button
Down Button
