3
SPECIFICATIONS
Model No.
Style
Capacity
Tons
Stroke
in (cm)
Effective Area
in
2
(cm
2
)
Collapsed Height
in (cm)
JHA-73
Standard
Solid
Plunger
Aluminum
7
3 .0 (7 .62)
1 .49 (9 .61)
5 .25 (13 .33)
JHA-156
15
6 .06 (15 .39)
3 .14 (20 .26)
9 .75 (24 .77)
JHA-356
35
6 .13 (15 .57)
7 .07 (45 .62)
10 .13 (25 .73)
JHA756
75
6 .06 (15 .39)
15 .90 (102 .59)
11 .25 (28 .59)
JHA-1506
150
6 .13 (15 .57)
30 .68 (197 .95)
12 .88 (32 .72)
JTA-76
Toe Lift
Aluminum
7
6 .06 (15 .39)
3 .14 (20 .26)
12 .56 (31 .90)
JTA-176
17
6 .13 (15 .57)
7 .07 (45 .26)
14 .19 (36 .04)
JTA-356
35
6 .06 (15 .39)
15 .90 (102 .59)
16 .63 (42 .24)
WARNING
The load must be evenly distributed over the entire jacking pad of the toe lift
attachment. The plunger must be in exact line with the movement of the load. When
using multiple units to lift a load, all jacks must be operated at the same time, so
that the load is lifted evenly. Failure to lift the load evenly could cause it to slip off the
jacking pad.
WARNING
DO NOT lift a load which exceeds the capacity of
the jack. The load rating is marked on the jack
nameplate.
WARNING
If the jack is subjected to abnormal or shock loads, it should be inspected
immediately by a qualified hydraulic technician.
SAFETY INFORMATION
(continued)
Enerpac JHA and JTA Series Jacks
These products conform with the
requirements for CE Marking .