14
4.3.2 Using an Extended Reaction Arm
(Fig. 10)
• Position the foot (17) of the SRS Series
extended reaction arm (19) against a
suitable reaction point (18). The reaction
point will counteract the force caused by
operating the tool.
• Follow instructions in Section 4.3.1.
WARNING
Do not exceed the
maximum allowable torque for the SRS
reaction arm being used. Catastrophic
failure of the reaction arm could occur,
and dislodged parts could become
dangerous projectiles. Damage to tool
could also result. Refer to Section 6.3 for
SRS reaction arm maximum allowable
torque specifications.
4.3.3 Using a Short Reaction Arm
(Fig. 11)
• Position the foot (17) of the SRA Series
short reaction arm (20) against a suitable
reaction point (18). The reaction point will
counteract the force caused by operating
the tool.
• Follow instructions in Section 4.3.1.
4.3.4 Using a Reaction Tube Extension
(Fig. 12)
• Position the RTE Series reaction tube
extension (21) against a suitable reaction
point (18). The reaction point will
Fig. 11
Fig. 10
Fig. 12
counteract the force caused by operating
the tool.
• Follow instructions in Section 4.3.1.
ENGLISH
