ENERMAX UC-9FATR2, Руководство пользователя

Страница: 9 / 21

8
3.3 The installation Steps
1. Insert the drive into 5.25” drive bay
2. Two connectivity options for USB & IEEE1394
：
2-1 Directly linking to M/B
2-1-1 Attach the USB cable & IEEE1394 cables into
USB & IEEE1394 pin header of the M/B.
2-1-2 Attach the USB & IEEE1394 cables into PCB pin
header.
Note
：
Make sure the position accurate by "UP" label
2-2 Transferring from back panel I/O of PC --Insert the USB &
IEEE1394 transfer cables into the ports in the rear of PC
through the opening of enclosed L type bracket.
3. Attach the fan extension wires to PCB & fans you want to
monitor and control
4. Attach the 4-pin card reader cable into the USB pin header
on M/B
5. Attach the SATA cable connector to motherboard & PCB.
6. Attach sensors to hardware you want to monitor with
enclosed stickers.