ENERMAX UC-9FATR2, Руководство пользователя

Страница: 7 / 21

6
d. Hardware temperature and fan speed alarm display
switch
：
push “MODE” button to shift the display for the
first set “T1 F1” and the second set “T2 F2”
Note: Please press “Reset” button after setting
for completing the setting step.
2.2.2 LCD function description
1. Temperature display range: 0~90 °C / 0~194 °F
2. Fan speed monitoring range: 1000~9900 RPM
3. Overheat temperature alarm:
When the temperature is higher than setting value,
the digits on LCD starts flashing and buzzer starts
beeping. Audio alarm will automatically stop in 30
seconds once the cause resulting in over
temperature is removed. However, digits on LCD will
keep flashing till the cause is completely eliminated.
4. Fan low / fan failure alarm:
When fan speed is lower than the setting value,
digits on LCD starts flashing and buzzer starts
beeping. The beeping will automatically stop in 30
seconds even though the cause is left unsolved.
However, the digits on LCD keep flashing till the
cause is completely eliminated.
5. The fan speed will not display if the fan is not
connected.