ENERMAX DIGIFANLESS EDF550AWN, Руководство пользователя

Страница: 6 / 56

5

CONNECTOR TYPES
24P Mainboard
For ATX/EEB/CEB server/workstation MB.
4+4P (8P) CPU +12V, in combined mode
8-pin configuration supports multi-CPU server/workstation systems and
some single extreme CPU systems.
4+4P(8P) CPU+12V, in split mode
4-pin configuration supports certain single CPU systems. Some multi-CPU
workstation/server system might also need this extra 4-pin 12V connector.
6+2P (8P) PCI Express, in combined mode
8-pin configuration supports latest extreme graphic cards, which require
8-pin PCI-E connector.
6+2P (8P) PCI Express, in split mode (6P PCI Express)
# 2
6-pin configuration supports most performance PCI-E graphic cards, which
require 6-pin PCI-E connector.
SATA
# 1
For SATA/SAS drives.
4P Molex
# 2
For IDE/SCSI/SAS drives or some AGP graphic card with traditional 4P
power in socket.
FDD
For floppy drive or certain add-on card.
#1 Some SATA drives might accept SATA or 4P Molex power. Normally, use either one of power connector to
power the driver, BUT NOT BOTH! Please check the drive’s manual for details.
#2 If you plan to put in 2 or more high end, power demanding GPU cards, please choose the motherboard
that comes with extra 4P Molex/ 4P FDD / 6P PCI-E power socket(s) on board and connect them with
your power supply. This will prevent the motherboard from overloading and possibly causing damage to
your system including your power supply. The damage to the motherboard and the power supply caused
by failing to do
the above instruction will not be covered under Enermax manufacturer’s
warranty. Please refer to your motherboard’s user manual to configure your system properly to prevent
damage to your system and your power supply.

MODULAR CABLES SUPPLIED
Use ONLY genuine ENERMAX modular cables coming with ENERMAX PSU. Third party
cables might not be compatible and might cause damage to your PSU and/or system, and use
of third party cable shall void PSU warranty.
24P MB & 4+4P (8P) CPU
Modular cable for 24P Motherboard and 4+4P (8P) CPU.
2 x 6+2P (8P) PCI-E
Modular cable for 1 or 2 performance PCI Express graphic cards, which
needs 6P or 8P PCI-E connector.
4 x SATA drives
Modular cable for SATA/SAS drives like ODD and HDD.