Page 5 of 7
PAIR WITH BLUETOOTH DEVICES
Pair with a Bluetooth device:
-
Place your Music Fan where is no more than one meter from the cell phone and
make sure there are no other Bluetooth devices nearby.
-
Before pairing, ensure that the speaker is turned.
-
Press and hold the power button on the speaker until the blue and red light starts
to blink alternately. The speaker is now in pairing mode.
-
Activate your cell phone's Bluetooth function to start pairing with the speaker.
Please refer to the cell phone's user's guide for pairing details.
-
Set the cell phone to search for the Bluetooth devices within one meter, and
follow the instructions on the cell phone's screen. When prompted, select
Xsounnd 5000 from the list and input the pair code"0000".
-
Once pairing is successfully completed, blue light on the speaker will turn on.
-
Go back to your cell phone's main menu and select the MP3 player to play the
music.
If the pairing cannot be completed within 5 minutes, then the Bluetooth function of the
speaker will turn off automatically. Please repeat the 1 to 7 steps to pair the speaker
with A2DP devices again to reset it.
As showed in the above picture, there is a 3.5 mm socket on the back of Xsounnd™
5000. You can also choose a 3.5mm cable to connect your players with Xsounnd™
5000 if it is not convenient for you to find a Bluetooth adapter for them.
USING YOUR XSOUNND
TM
5000
Listen to the music from the Bluetooth device.
After your Music Fan has been paired with your cell phone successfully, you may enjoy
the music of the cell phone from any speaker. Press the /- on the speaker to
adjust the volume.
To stream stereo audio from your cell phone, please make sure they support the
Bluetooth A2DP profile.
Listen to Stereo Audio from a non- A2DP player
After you connecte the speaker with non-A2DP player with 3.5 MM cable, you can also
stream the audio from the player to Xsounnd™ 5000.
