Page 4 of 7
STARTING
To use your Xsounnd™ 5000, please follow these simple steps:
-
Power your Music Fan using power cable
-
The power cable is included in the package.
-
The power socket for the power cable is located on the back of the speaker.
-
Connect the mains adaptor to an AC wall outlet .
NOTE:
-
Use the AC outlet to power the speaker ONLY.
-
The charge function of the speaker system may cause occasional radio
interference. It will return/get back to normal operation when the interference
stops.
TURN ON AND OFF
1)
Turn On
Turn On the POWER button to switch on the device.
Each time when you turn on the speaker by pressing the power
button, it will automatically to pairing. If there is no Bluetooth device be
paired with the speaker, the Bluetooth function will turn off automatically.
2)
Turn Off
Turn Off the POWER button to switch off the device.
To disconnect the Bluetooth connection, simply turn off the speaker.
PAIR WITH BLUETOOTH DEVICES
Prior to using your Xsounnd™ 5000 for the first time, you must pair it with a Bluetooth
enabled music cell phone or an A2DP ready portable player.
If you are already get a Bluetooth dongle that compliant with the player, you can pair it
with this speaker to enjoy music on players without a headset.
The information below describes the pairing procedure for the speaker with a typical
Bluetooth enabled music cell phone and portable player. However, the pairing
procedure may vary with different models of cell phones or portable players. Please
refer to the user's guide provided by the respective manufacturer for pairing details.
