User Manual Xpresionn™ 2000 25/26
Ref: 050505
TROUBLE SHOOTING
Problem
Possible causes
What to do
The display on the
front panel does not
light up
Main cable is not
connected.
Check that the main
cable is plugged into the
power socket
No sound or picture,
but the front panel
shows red light
The receiver is in standby
mode.
Press the standby
button
No sound or picture.
No signal or weak signal.
Check the cable
connections, antenna
and other equipment
connected between the
antenna and the
receiver
Signal is too strong.
Connected a signal
attenuated to the
antenna input
Antenna noise factor too
high.
Change to an antenna
with lower noise factor
Bad picture / blocking
error
The antenna is faulty.
Change the antenna.
The picture is not
displayed on the
screen, when
switching on
The system is connected by
RF leads
Check the UHF channel
fixed in your system and
tune the UHF channel
properly.
There is interference
on your terrestrial
program or video
signal
The system is connected by
RF leads and the output
program of the receiver
interference with an existing
terrestrial programs or video
signal.
Change the receiver
output program to a
more suitable program,
or connect the system
by scart leads.
Battery exhausted.
Change the batteries.
The RCU is not
working.
RCU is incorrectly aimed.
Note
: If you have tried all of the actions suggested above, without
solving the problem, please contact your dealer or a customer service
adviser.
