ENERGY SISTEM nusic box9, Руководство пользователя

Страница: 8 / 9

8/9 energysistem.com
Audio input
You can also enjoy music playback on your Music Box 9 by connecting your music player to the Audio-In (8) by means of
the provided audio cable with 3.5 mm jack connector. This mode appears on one side and is indicated as "AUX".
NOTE: It is not possible to control music playback from the speaker while you are using this mode. In order to control
playback functions you will have to use the music player that you have connected.
FM radio function
In order to use the FM radio function, it is necessary that you first carry out a search of all stations available. The radio
stations will be saved to the speaker internal memory. Therefore it is not necessary to carry out a new search each time
you switch it on. You will only have to carry out a new search if you place the device in a new location or if you change
the frequency of the saved radio station.
In order to carry out a search of all radio stations, press the Change function (14) button until the FM mode appears on
screen. The "FM" LED function indicator (15) will light up when the radio funtion is selected. Press and hold the Change
function button (14) for 2 seconds. The "FM" LED function indicator (15) will flash while carrying out the search. Once
the process is completed, the LED will glow as usual. The process can take a few minutes.
You can use the provided audio cable with jack connector as an antenna cable to improve the signal. In order to do so,
connect the above mentioned cable to the AUX port, return to FM mode and carry out a new seach of radio stations
following the steps that have been explained before.
Press and hold Next (6) or Back (4) to select the radio station that you prefer. Radio stations will appear in the order in
which they were saved. Press Next (6) or Back (4) to tune the selected frequency.
Note: The power adapter used to charge the device may interfere with the FM radio signal. We recommend to maintain
a distance of 50 cm between the power adapter and the speaker if FM radio function is enabled and you are charging
the battery simultaneously.
External storage
Insert an external USB stick or a microSD card into the corresponding slots, (9) and (10), to play MP3 or WAV files. The
Music Box 9 will enable this playback mode automatically. Music playback will start in a few seconds once the external
storage unit has been read. Do not remove the storage unit while the reading process is in progress.
If you turn off the Music Box 9 while the device is playing the files of the external storage unit, the internal memory will
save the moment when you paused playback. If you insert the same removable card or stick once again, playback will
resume from the point at which it stopped.
To move to the previous or the following track, press Next (6) or Back (4). You can also move to the next folder of your
microSD card / USB stick. To do so, press and hold the Change function (14) button for a few seconds.
Press and hold Next (6) or Back (4) while the device is playing a song to fast forward through it or to rewind it. Playback
will resume when you release the button.
Important: We recommend not to remove the external storage unit while the reading process is in progress. Before
doing that, please change mode or turn off the speaker.
Playback type (Continuous or Random)
If you use the external USB memory or the microSD card, press and hold the Start / Pause and Call Control button (5) for
2 seconds to choose the type of playback you prefer, Continuous or Random playback.
In Random playback, the function indicator LED (15) will blink and in Continuous playback it will remain fixed.
Battery life
The battery life of your Music Box 9 depends on the the type of music and the selected volume level. Please take a look
at this comparative table to see more information about the approximate battery life of your device: