ENERGY SISTEM LED TV3010, Руководство пользователя

Страница: 7 / 30

42
4.2. Installig the batteries
Pull the battery loader out and insert a CR2025 battery.
≥
Make sure to place the battery in the correct direction.
≥
When not using the remote control for a long period of time remove the battery.
≥
When operating range reduces replace the battery.
≥
Do not recharge, disassemble, or heat the battery. Misuse of the battery may
result in leakage that will damage the remote control.
4.3. Using the remote control
To use the remote control, point it towards to the IR receiver.
The remote control range is 4 metres or less within a
±
30° angle from the remote
sensor. If the remote’s battery is low, the remote may not function properly, so
replacing the battery immediately is recommended.
The remote control will not work if the way to the receiver is blocked.
Sunlight or other very strong light will decrease the sensitivity of the remote control.
5. BUILT-IN ReCHaRGeaBLe BaTTeRy
This portable TV comes with a built-in rechargeable Lithium-Ion battery.
≥
Charge the battery fully before initial use for at least 8 hours. Charging time is
normally about 4hours. A fully charged battery delivers about 2.5 hours of use.
≥
When the battery is weak, an indication symbol will appear on the screen and the
unit will power off automatically after a few minutes.
6. INSTaLLaTION aND CONNeCTIONS
Caution: Make sure to check the voltage specification of the wall outlet is the same
rating with the receiver. To prevent the risk of electric shock, do not open the cover
or the back of the TV.